top of page
In-Stock Equipment
2026 GVM Multi-Grip Tire Handler
GVM’s Multi-Grip Tire Handler was designed to allow users to change tires quickly, safely, and efficiently on application units. The tire handler can lift and maneuver tire and wheel assemblies weighing up to 2,000 pounds, and from 56 to 90 inches in diameter. Its universal mounting plate allows it to easily attach to any skid steer or front-end loader with a universal mounting plate. Featuring three hydraulically operated gripping jaws, allowing it to easily center on the tire with a firm grip. The grabbing assembly swivels approximately 60 degrees, allowing users to easily align the wheel with the studs or wheel bolt holes on the hub. Depending on the abilities of the front-end loader, users can pick tires up from a flat position on the ground, rotate them to a vertical position, and easily mount onto the application unit.
$4,800
$4,800
2019 GVM Double Duty Air
3-compartment 72 ft 304SS booms, painted 409 SS, 13’x78 in. wide, 350 cu ft, LH and RH 16 in. SS conveyor chains, SS hopper screens, 72 ft 304SS booms, 27 in. nozzle spacings, break away, 22 in. fan, electric roll tarp with Raven RCM ISO control, Recon SpreadSense, lights and reflector, hydraulic tilt and fold, electric-over-hydraulic controls, rear camera, dual 90cc pumps. Fits RBR Vector chassis, GVM Prowler chassis, and Case/John Deere/AG Chem floater.
SN: 196185 (PA)
$65,000
SN: 196185 (PA)
$65,000
2026 GVM DAS-500 Anti-Icing System
500-gal poly tank, hitch mounted, 2½ ton truck with an 8 ft bed required, 100 ft hose reel and spray wand, single lane applicator with PVC spray bar, hot dipped galvanized steel frame, 2 in. poly Pacer pump with 6.5 hp honda engine, on/off controller in cab. Tested, and ready for your operation.
(PA) $9,000
(PA) $9,000
bottom of page