2007 Ray-Man 30, 36, or 42 ft. Charger II Transport Trailer SF or FB

• 409 or 304 Stainless steel 2-6 compartment 40 degree hoppers with dump gates, transitions and auger tubes.
  
• 9 in. floor auger with adjustable speed control.
  
• Charger II-SF folding 9 in. discharge auger x 15 ft. long or Charger II-FB 270 degree 9 in. discharge auger x 14 ft. long.
  
• Hydraulic discharge height adjustment and tandem hydraulic system.
  
• Integrated trailer frame with vertical “X” braces, (2) 22,500 lb. axles, 16.5 x 7 air brakes, Anti-Lock braking system, Automatic brake adjusters, Hutch 9700 three leaf spring suspension, Unimount hubs, Ten hole steel disc wheels, Integral rear bumper and 11R22.5 G radial tires.
  
• Rear mounted ladder and optional front ladder.
  
• Sealed marker lights mounted in rubber grommets and tail lights
  
• Shur Lok Roll tarp or SRT-2 SS electric roll tarp.
  
• Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish.
  
• Tenders Optional: Split compartments, 304 stainless steel option, 409 stainless steel frame, Top catwalk, Stainless steel auger flighting, floor auger pit dump slide gate Epoxy ester primer, modified urethane finish in lieu of standard Air shift PTO, Charger II-FB 270 degree discharge system.

2007 Ray-Man 12, 14, 18, 20 and 24 ft. Charger II Transports SF or FB

• 409 or 304 Stainless steel 2-6 compartment 40 degree hoppers with dump gates, transitions and auger tubes.
  
• 9 in. floor auger with adjustable speed control
  
• Charger II-SF folding 9 in. discharge auger x 15 ft. long or Charger II-FB 270 degree 9 in. discharge auger x 14 ft. long.
  
• Hydraulic discharge height adjustment and tandem hydraulic pump
  
• Oil reservoir with filter, sump strainers, temperature/sight gauge Direct drive hydraulic motors, Rear mounted control valves with adj. relief
  
• Full-length stainless steel enclosed fenders with mud flaps.
  
• Rear mounted ladder and optional front ladder.
  
• Integral rear bumper
  
• Sealed marker lights mounted in rubber grommets and tail lights
  
• Shur Lok Roll tarp or SRT-2 SS electric roll tarp.
  
• Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish.

• Eliminate Stockpile Clean-Up
  
• Unload Lime, Fertilizer, Dirt or Rock
  
• Wide, Low Speed Belt for Gentle Handling
  
• Easily Towed Behind Floater or Pick-Up
  
• 24 in. or 30 in. wide 2 ply rubber belt with Flexco 550J splice lacing
  
• 6 in.–8.2# structural “C” channel frame rails
  
• 4.5 in. diameter 35 degree tri-rollers with sealed bearings
  
• 12 in. diameter drive pulley with rough top lagging
  
• 10 in. diameter self-cleaning tail pulley
  
• Square tubular steel under carriage frame
  
• 3,000 lb. hubs and spindles, 6 bolt on 6 in. bolt circle
  
• 15 in. x 6 in. steel wheels
  
• New LT235/75R15-C radial tires
  
• Intake hopper 40 in. wide x 110 in. long x 28 in. overall height
  
• 10 in. diameter roller wheels on end of hopper
  
• Self-aligning return roller
  
• Adjustable 3/4 in. clevis pin hitch
  
• Class III safety chains
  
• Unit is acid washed, coated with an epoxy ester primer and a red alkyd enamel finish
  
• Control valve with adjustable pressure relief
  
• Heavy duty chain drive hydraulic motor
• One pair 3/4 in. x 15 ft. long hydraulic hook-up hoses with quick couplers