Loading...

Mounted Spreader Body
  • Mounted Spreader Body

    Mounted Spreader Body

  • Mounted Spreader Body

    Mounted Spreader Body

  • Accessories

    Accessories

  • Pan Testing

    Pan Testing

  • Pull type

    Pull type

The GVM Double Duty spreader line offers the widest, most accurate spreading pattern in the industry.  The Double Duty spreads a guaranteed 90 to 105 feet at a less than 15 percent coefficient of variation with granular fertilizer. Its wide spread pattern is due to the patented, reverse rotating spinner and its accuracy is due to the pre-adjusted funnel forcing material to fall directly onto the spinner disc.

The Double Duty’s wider spread pattern allows you to make fewer trips through the field, saving you fuel and time while minimizing field compaction.

  • Single product applicator
  • Patented spinner design spreads a guaranteed 90-105 ft pattern
  • Spreads fertilizer, gypsum, lime and most litters
  • 34 in. wide belt-over-chain conveyor for even flow to spinners and to avoid bridging when spreading lime and litter
  • Patented funnel divider allows the material to flow to the spinners with pinpoint control
  • 24 in. computer controlled spinners maintain consistency and accuracy
  • Control system offers special features for controlling the 34 in. belt-over-chain drag to ground speed regardless of varying terrain
  • Ability to automate spinner speeds within 3%
  • Viper DGPS controller
  • 55 gal. PWM hydraulic system spreads rates as low as 100 lb fertilizer per acre and as high as of over 3 ton of lime per acre at speeds over 12 mph
  • Raven 180 count sensor, 40 gal. hydraulic reservoir, 12V cooler and pressure relief valve system
  • Patented PWM controlled, 24 in. 304 stainless steel spinner design
  • Commercial heavy-duty gear motors with double bearing output shafts are bottom mounted to a ¼ in. 304 stainless steel spinner nest assembly
  • Standard quick-change 304 stainless steel uniquely designed lime and fertilizer funnel with hillside divider
  • No. 4, 34 in. belt-over-chain conveyor system
    • Heavy-duty pintle chain
    • Multi-ply belt riveted (5 rivets per crossbar) to the crossbars
    • Solid rubber sealer strips
    • Twin-line chain oiler with clear sight-gauge tubing
  • Inverted removable V-shield reduces chance of bridging and protects the conveyor system (9.5T and 11.0T models only)
  • Rawson 6:1 reduction dual-pinion spur gear drive with two hydraulic Charlyn motors drives the conveyor chain
  • All 304 stainless steel or painted 409 stainless steel body construction
    • 10 gauge hopper
    • 7 gauge subframe
    • 4 x 2 x 3/16 in. stainless steel cross tubes (mild steel cross members on the 409 SS construction)
  • Four point attach locations for full flotation combo mount
  • Bolt-in rear end gate matches the steel of the spreader
  • Multiple capacities to fit any machine:
    • 8.0 ton, 10 ft, 250 cu ft struck capacity
    • 9.5 ton, 12 ft, 305 cu ft struck capacity
    • 11 ton, 13 ft, 330 cu ft struck capacity
  • Available in 304 or painted 409 stainless steel
  • Raven or Ag Leader controller and GPS
  • Raven controller and GPS options:
    • SCS 5000 CAN controller
    • Envizio Pro CAN controller with built in Phoenix 200 Helix receiver
    • Viper Pro CAN controller with guidance software  
  • All stainless steel fenders with mud flaps
  • Brand PWM control with 180-count rate sensor and CAN node
  • Bin level sensors
  • DOT LED side marker lights and rear LED 3 light, lightbar, LED Tail Light Kit, trailer plug, and backup alarm  
  • Stainless steel bi-fold ladder
  • Frame cover, 304 stainless steel (underbody panel recommended)
  • Fusion Cable-Lok Roll Tarp with stainless bows                         
  • Fusion Electric Cable-Lok Roll Tarp with transmitter and stainless bows
Double Duty Fusion Insert MicroBin
  • Dual hopper removable insert to broadcast 2 products simultaneously
  • Twin hoppers are at even heights for easy loading and roll tarp installation
  • Holds 3 tons urea, 4 tons pot ash, 95 cu ft capacity
  • Made of all 304 stainless steel
  • 27 in. no. 4 belt-over-chain conveyor system
  • Bolt into the Double Duty to apply up to 3 products
  • Add-on hopper allows you to spread granular micronutrients or seeds as a second or third product.
  • All 304 stainless steel construction
  • 11 cu ft, 1100 lb struck capacity

The GVM Double Duty Spreader line offers unique control systems and the widest, most accurate spreading pattern in the industry, regardless of varying terrain. Its unique spinner design and the ability to automate spinner speeds within three percent, the Double Duty always maintains a constant spread pattern.

The Double Duty’s wide and accurate spread pattern is due to its patented, reverse rotating spinners and the pre-adjusted funnel, which forces material to fall directly onto the spinner disc. The Double Duty offers a guaranteed 90-105 foot spread pattern at a less than 15% coefficient of variation with granular fertilizer. Its wider spread pattern allows you to make fewer trips through the field, to minimize compaction and reduce fuel consumption.

Featuring a 34-inch wide belt-over-chain conveyor the Double Duty spreader provides an even flow to the spinners with no bridging when spreading lime or litter. Its patented funnel divider allows material to flow to the spinners with pin-point control and 24-inch computer controlled spinners maintain consistency and accuracy.

 

Features

  • Toughest design in spreading industry
  • Spreads a guaranteed 90-105 ft
  • Adjustable spread pattern:
    • Lime up to 60 ft
    • Fertilizer 90-105 ft
  • 34 in. belt-over-chain conveyor
  • Removable inverted V-shield to keep excess weight off belt (9.5T & 11.0T bodies only)
  • Manually controlled single gate
  • PWM spinner speed control from the computer
  • Tractor hydraulic pump: 8.0T min. 25-35 GPM @ 2,500 PSI, 9.5T & 11.0T min. 42-52 GPM @ 2,500 PSI
  • Adjustable combination hitch
  • Automated spinner speeds within 3% provide a constant spreading pattern
  • Variable rate application capabilities with any field controller

Construction Options

  • Fusion Ready 8.0 ton, 250 cu ft struck capacity
  • Fusion Ready 9.5 ton, 305 cu ft struck capacity
  • Fusion Ready 11.0 ton, 330 cu ft struck capacity
  • 304 or 409 painted stainless steel frame construction

Multi-Product Options

Double Duty Fusion Insert MicroBin
  • Simultaneously spreads up to 2 products, 3 ton
  • 95 cu ft struck capacity
  • Add-on, removable hopper allows you to spread granular micronutrients or seeds as a second or third product
  • 11 cu ft, 1100 lb struck. capacity

Options

  • Multi-porduct options: GVM Fusion Insert and/or New Leader MicroBin add on
  • Bin level sensors
  • DOT LED side marker lights and rear LED 3 light, lightbar, LED Tail Light Kit, trailer plug, and backup alarm
  • 380/90R46 Goodyear Ultra Sprayer or 650/75R32 Goodyear Floater tires
  • Shur-Lok Fusion Cable-Lok roll tarp with stainless steel bows, installed
  • Shur-Lok Electric Fusion Cable-Lok roll tarp with stainless steel bows, installed
  • Raven, Ag Leader, or ISOBUS controller and GPS options

Controller and GPS Options

Compatible with and ISOBUS controller. Controller and GPS options include:

  • Raven SCS 5000 CAN controller
  • Raven Envizio Pro CAN controller with built in 200 Phoenix Helix receiver
  • Raven Envizio Pro variable rate software
  • Raven Viper Pro CAN controller with guidance software (need a receiver for GPS)
  • Ag Leader Integra (need a receiver for GPS)
  • Ag Leader Edge
  • RGL 600 all weather lightbar
  • Phoenix 200 GPS smart antenna with remote keypad, WAAS correction and 10 Hz
  • Tilt compensated receiver

Hopper

 

8.0 Ton

9.5 Ton

11.0 Ton

Dimensions

10 ft x 102 in. wide

12 ft x 102 in. wide

13 ft x 102 in. wide

Struck capacity

250 ft3 (7.1 m3)

305 ft3 (8.6 m3)

330 ft3 (9.3 m3)

Sub-frame construction

7 gauge subframe,
4 x 2 x 3/16 SS cross tubes  

7 gauge subframe,
4 x 2 x 3/16 SS cross tubes  

7 gauge subframe,
4 x 2 x 3/16 SS cross tubes  

Construction

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS 

Supports

Inverted V-shield keeps excess weight off belt to prevent bridging,
matches steel of spreader

Inverted V-shield keeps excess weight off belt to prevent bridging,
matches steel of spreader

Rear gates

Bolt-in rear end gate, matches steel of spreader  

Bolt-in rear end gate, matches steel of spreader 

Bolt-in rear end gate, matches steel of spreader 

Conveyor

 

8.0 Ton

9.5 Ton

11.0 Ton

Size

No. 4, 34 in. belt-over-chain conveyor

No. 4, 34 in. belt-over-chain conveyor

No. 4, 34 in. belt-over-chain conveyor

Material

Heavy-duty pintle chain with multi-ply belt, riveted to the crossbar
(5 rivets per crossbar)

Heavy-duty pintle chain with multi-ply belt, riveted to the crossbar
(5 rivets per crossbar)

Heavy-duty pintle chain with multi-ply belt, riveted to the crossbar
(5 rivets per crossbar)

Belt sealer

Solid rubber sealer strips prevent material from leaking off chain

Solid rubber sealer strips prevent material from leaking off chain

Solid rubber sealer strips prevent material from leaking off chain

Chain oiler

Twin-line with clear sight gauge tubing

Twin-line with clear sight gauge tubing

Twin-line with clear sight gauge tubing

Spinners

 

8.0 Ton

9.5 Ton

11.0 Ton

 Size and construction

24 in., 304 SS

24 in., 304 SS

24 in., 304 SS

 Spread width

90-105 ft (27.4-32 m)

90-105 ft (27.4-32 m)

90-105 ft (27.4-32 m)

Application rate

PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre  to 3 ton lime/acre at speeds over 8 mph

PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 ton lime/acre at speeds over 12 mph

PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 ton lime/acre at speeds over 12 mph

Accuracy

180 count sensor, pairs with any field computer

180 count sensor, pairs with any field computer

180 count sensor, pairs with any field computer

Spinner motors

Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted  to ¼ in. 304 SS spinner nest assembly

Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted  to ¼ in. 304 SS spinner nest assembly

Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted  to ¼ in. 304 SS spinner nest assembly

Spinner speed

Computer controlled hydraulic PWM valve

Computer controlled hydraulic PWM valve

Computer controlled hydraulic PWM valve

Belt control 

Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors 

Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors

Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors

Hillside divider 

Quick change, 304 SS, uniquely designed for lime and fertilizer 

Quick change, 304 SS, uniquely designed for lime and fertilizer

Quick change, 304 SS, uniquely designed for lime and fertilizer

Hydraulics

 

8.0 Ton

9.5 Ton

11.0 Ton

Requirement

Minimum
25-35 GPM @ 2500 PSI

Minimum
42-52 GPM @ 2500 PSI

Minimum
42-52 GPM @ 2500 PSI

Chassis

 

8.0 Ton

9.5 Ton

11.0 Ton

Frame

 2 x 6 x ¼ in.
rectangular tubing

 3 x 8 x ¼ in.
rectangular tubing
 

 3 x 8 x ¼ in. 
rectangular tubing
 

Width

120 in. (3.05 m)
center to center

120 in. (3.05 m) outside,
60 in. (1.52 m) inside,
center to center

120 in. (3.05 m) outside, 
60 in. (1.52 m) inside,
center to center

Overall length

18 ft 9 in. (5.72 m)

22 ft (6.71 m)

23 ft (7.01 m)

Clearance

34 in. (0.86 m)

36.5 in. (0.93 m)

36.5 in. (0.93 m)

Axle

25,000 lb single axle design

50,000 lb single axle design

50,000 lb single axle design

Hitch

Adjustable combination hitch

Adjustable combination hitch

Adjustable combination hitch

Tires

 

8.0 Ton

9.5 Ton

11.0 Ton

Standard tires

380/90R46

Dual 380/90R46

Dual 380/90R46

Flotation tires

650/75R32 or 800/65R32, optional  

650/75R32 or 800/65R32, optional  

650/75R32 or 800/65R32, optional  

 

 

Multi-Product Options

 

8.0 Ton

9.5 Ton

11.0 Ton

Fusion insert

Dimension

5 ft x 102 in. wide, peaked ends 

5 ft x 102 in. wide, peaked ends

5 ft x 102 in. wide, peaked ends

Capacity

3 ton, 95 ft3 

3 ton, 95 ft3 

3 ton, 95 ft3 

Hopper Capacity 

111 ft3 with Fusion Insert 

111 ft3 with Fusion Insert 

111 ft3 with Fusion Insert 

Products 

 Simultaneously spread up to 2 products

 Simultaneously spread up to 2 products

 Simultaneously spread up to 2 products

Control 

PWM fast close drag valve with conveyor rate sensor and bin level sensor 

PWM fast close drag valve with conveyor rate sensor and bin level sensor 

PWM fast close drag valve with conveyor rate sensor and bin level sensor 

Mounting 

 Removable, mounts inside Double Duty after removing end gate

Removable, mounts inside Double Duty after removing end gate

Removable, mounts inside Double Duty after removing end gate

MicroBin

Construction

304 SS with sight glass, vented for quick fill 

304 SS with sight glass, vented for quick fill

304 SS with sight glass, vented for quick fill

Capacity

1100 lb, 11 ft3 struck 

1100 lb, 11 ft3 struck

1100 lb, 11 ft3 struck

Products

Spread granular micro-nutrients as a second or third product 

Spread granular micro-nutrients as a second or third product 

Spread granular micro-nutrients as a second or third product 

Control

Hydraulic servo controlled metering wheel, with rate sensor and single product control node 

Hydraulic servo controlled metering wheel, with rate sensor and single product control node 

Hydraulic servo controlled metering wheel, with rate sensor and single product control node 

Mounting

Removable, rear mounted 

Removable, rear mounted

Removable, rear mounted

Application Rate

 3-35 lb per acre

 3-35 lb per acre

 3-35 lb per acre