Super 150/200. For limited volume application needs, the Super 150 and 200 Spreaders offer efficient and uniform spreading patterns.  With its 25-foot wide delivery and 50 cu. ft. capacity, the dual spinner S-150 fits the precision pattern needs of turf and orchard applications.  Fitted with the orchard deflector, the S-150 delivers the bulk of material at the center of orchard rows with a 15- to 25-foot pattern.  Using a 100% overlap pyramid pattern, the S-150 delivers a total spread width of 50 ft.

• Dependable ground drive, two-speed conveyer system
• Application rate can be adjusted from less than 100 pounds per acre to more than one ton per acre
• PTO driven dual spinners with four adjustable curved blades on each
• Material divider delivers fertilizer to spinners; adjustable baffle plate controls material flow
• Multi-leaf spring suspension with rocker arms for equal load distribution
• Heavy duty, narrow track frame with single axle
• Metering system adjusted manually

1. Two Speed Conveyor provides additional application flexibility so you can set rates with kit from 39 lbs. (17.69 kg) to 2616 lbs. (1187 kg) per acre.

2. Curved, Cupped Blades. To less the dispersion of excess dust and particles, curved and cupped stainless steel blades minimize material pulverization.

3. Conveyor Ground Drive. A mechanically simple chain and gear conveyor system is directly driven by the spreader’s ground speed through chains and pulleys. There are no hydraulics or complex components that can clog up.

Super 500 Spreaders. All five S-500 configurations share a hopper capacity struck of 160 cu. ft. and heaped 175 cu. ft.  The dual axle spreader is available in dual spinner, single spinner, ground driven spinner, narrow track dual spinner and narrow track single spinner configurations. S-500 narrow track spreaders have a 62-inch wheel track and are designed for use in 30-inch row crop applications.

• Dependable ground drive, two-speed conveyer system
• Application rate can be adjusted from less than 100 pounds per acre to more than one ton per acre
• PTO driven single or dual spinners with four adjustable curved blades on each
• Material divider delivers fertilizer to spinners; adjustable baffle plate controls material flow
• Heavy-duty frame with dual axles
• Multi-leaf spring suspension with rocker arms for equal load distribution
• Metering system adjusted manuallyOptional Features
• 12 gauge stainless steel hoppers with continuous weld construction
• 8-hp Honda gas engine to drive spinner system
• 540 rpm Weasler PTO to run 40- or 50-foot spinner distributors
• 62- or 88-inch axles with 2 or 4 wheel brake options
• Low rate kit
• Hydraulic conveyor control
• 40-ft dual spinners delivering 80-ft. swath width
• 50-ft. dual spinners delivering swath width of 100 ft

Super 600 Spreader. The S-600 features a 200-cu. ft. hopper capacity – struck or 220-cu. ft.  The spreader is available in both dual and single spinner configurations as well as narrow track dual and single spinner models. The S-600 dual spinner spreaders, using the 100% overlap pyramid type pattern, deliver an 80-foot spread pattern with a 540 rpm PTO shaft or 100-foot pattern powered by a 1,000 rpm PTO shaft, depending on spinner option selected.  S-600 single spinner models deliver a 65-foot total spread pattern width using a single pass flat type pattern.

S-600 narrow track spreaders have a 62-inch wheel track and are designed for use in 30-inch row crop applications.

• Dependable ground drive, two-speed conveyer system
• Application rate can be adjusted from less than 100 pounds per acre to more than one ton per acre
• 12 gauge 409 stainless steel hopper with continuous weld construction
• PTO driven dual spinners with four adjustable curved blades on each or single with six adjustable blades
• Material divider delivers fertilizer to spinners; adjustable baffle plate controls material flow
• Heavy-duty frame dual axles and two brakes
• Multi-leaf spring suspension with rocker arms for equal load distribution
• Metering system adjusted manually

Optional Features

• 8-hp Honda gas engine to drive spinner system
• 540 rpm Weasler PTO to run dual or single spinner distributors
• 62- or 75-in. axles with 2 or 4 wheel brake options
• Low rate kit
• Hydraulic conveyor control
• 40-ft dual spinners delivering 80-ft. swath width
• 50-ft. dual spinners delivering swath width of 100 ft.

Super 800 Spreader. Featuring a 250-cu. ft. hopper capacity—struck or 270-cu. ft. heaped, the S-800 is the largest pulltype spreader Willmar offers.  The S-800 is available in both dual and single spinner configurations.

• Dependable ground drive, two speed conveyer system
• Application rate can be adjusted from less than 100 pounds per acre to more than one ton per acre
• 12 gauge 409 stainless steel hopper with continuous weld construction
• PTO driven dual spinners with four adjustable curved blades on each or single with six adjustable blades
• Material divider delivers fertilizer to spinners; adjustable baffle plate controls material flow
• Heavy duty frame with dual axles and four brakes
• Multi-leaf spring suspension with rocker arms for equal load distribution
• Metering system adjusted manually
• Optional Features
• 8-hp Honda gas engine to drive spinner system
• 540 rpm Weasler PTO to run dual or single spinner distributors
• High hp, 1000 rpm PTO shaft
• 62- or 75-inch axles with 2 or 4 wheel brake options
• Low rate kit
• Hydraulic conveyor control
• 40-ft dual spinners delivering 80-ft. swath width
• 50-ft. dual spinners delivering swath width of 100 ft.

1. Two Speed Conveyor allows you to control application rates in low or high ranges from 311 to 1033 lbs. (141-469 kg) of material per acre.

2. Conveyor Drive System. A mechanically simple chain and gear conveyor system is directly driven by the spreader’s ground speed through chains and pulleys. A slip clutch prevents damage to the components if the conveyor belt unintentionally stops. Conveyor shields guide the slackened chain over the cross members to prevent metal to metal contact.

3. High-Horsepower PTO-Shaft. These spreaders come standard with a 540 PTO. High-horsepower, 540/1000 (shown) or 1000 rpm PTO shafts are optionally available.

4. Tailgates. The S-500, S-600 & S-800 are equipped with lighting and reflective devices that meet the ASAE S279 lighting and marking requirements for agricultural machinery when operated on the road.