You are researching Dalton Ag Liquid Applicators, Toolbars, Running Gears and Mobility Spreaders

Dalton Ag	Liquid Applicators
	The DLQHD Series Liquid Applicator is built "TUFF" for the most rugged terrain. The 5 x 7 tubular main frame and the 4 x 6 front mount toolbar give you the strength and the visibility you need in today's environment. The unit features the versatility of handling a 21' to 42' toolbar and 15" - 36" row spacing. The ground driven pump and drive system include a 15" bar lug shur grip tire and stainless steel drive chain. Optional single or twin piston pump gives you a large range of application rates. The spring loaded ground driven pump is mounted on front bar for better visibility and automatically stops when toolbar is lifted for turnaround. The coulter injection equipped with straight stream nozzle and stainless steel nipple injects the fertilizer directly behind the coulter and applies where needed. High clearance 46" lug tires with heavy 10-bolt hubs give you maximum crop clearance. Features: Double 4 x 6 front mounted toolbar mounted on heavy 4 x 6 main frame, hydraulic wing fold • Ground driven pump drive with John Blue Pump. Spring cushioned & adjustable height • Coulter injection with straight stream nozzles & check valves • Heavy-duty spindle & 8 bolt hubs • Adjustable dual clevis and 4 x 4 drop foot jack• Tanks available: 500, 750 & 1000 gallon
	Anhydrous Ammonia Toolbars
	DW SERIES TOOLBARS * 60" rank front to back * Staggering of shanks allows better trash flo * Lift Wheel with Walkers - available with 8-bolt Single Lift Wheel * Adjustable hitch clevis and single tongue * Extended swinging wagon hitch * 2" Lift Wheel Pins DW SERIES AA TOOLBAR * Heavy duty hinge with DOM bushings, grease fittings, 2" hinge pin - locked in with 1/2" bolt * Wings fold over and inside of center section * Removable spacers for lots of wing flex * Exellent balance with enough tongue weight for towing * Boxed tube cross members with reinforcing plates * Hydraulic lift system and hydraulic gauge wheels utilize 3000# PSI and o-ring fitted rephasing cylinders * Wheels pivot is 1-1/2" spindle with tapered roller bearings * Hydraulic folding outer wings - folds over 180 degrees and features a mechanical self-locking hold down system. All pivots are DOM bushing material for long service
	Running Gears for NH3 Tanks:
	REACH POLE WAGONS. This trailer is for the operator who insists on clean, rugged, dependable design, combined with built-in toughness. The double 6-leaf springs helps for a better ride and stability. A full 17" under the front axle for better ground clearance. DUAL TANK WAGON. This heavy duty, built tough wagon has a tandem axle for easier towing and stability. The short gooseneck keeps the overall length to minimum and maximizes turning radius. Leaf spring lift assist and extendable tongue makes hooking up a one man operation.
Mobility	Dry Fertilizer Spreaders
	Fertilizer Spreaders. • 500–170 cu. ft., 409 stainless steel hopper, painted white. • 600–200 cu. ft., 409 stainless steel hopper, painted white. • 650–225 cu. ft., 409 stainless steel hopper, painted white. • 900–300 cu. ft., 409 stainless steel hopper, painted white. • Stainless Steel 8 in. Conveyor Chain, Stainless Steel Conveyor Trough, Stainless Steel Metering Gate and Rear Skid Section, Stainless Steel Drive Chains and 2-speed Conveyor Drive. • Nylon “Fitted” Tarp and Ridge pole. • Rear Safety Bumper, Safety Chains. • Gearbox Driven Distributor. • Tandem Walking Beam Axles. • (500) 12.5 X 15 in. Tires and Rims, (600 & 650) 16.5 X 16.1 in. Tires and Rims with 2-wheel brakes, and (900) 19.5 X 16.1 in. Tires and Rims with 4-wheel brakes. • One year warranty. • Spreader Options: Mud and Gravel Fenders, Flip Top, Remote Controlled Conveyor Clutch, 1000 RPM PTO, Light Kit, Single Spinner Option, and 2 Wheel Surge Brakes. Hydrive. The Hydrive option features an axle-driven spreading system with ground speed coordinated conveyor and hydraulic powered spinners. Spreads as slow as 3.5 mph. Hydrive is accurate too—with constant application rates at variable speeds up to 15 mph. No more PTO = Less maintenance. Established hydraulic axle-drive has 7-year history of fieldwork. It’s proven rugged and convenient. Many of your customers will spread with the same pickup that hauled the spreader to the field. It saves time and often frees a tractor for other work. Customers like the convenience of the Hydrive and you will like the competitive edge Hydrive gives. Mobility builds Hydrive spreaders to last. John Deere pressure -compensated hydraulic pump, 2.5 in. axle shafts from a durable and proven component foundation for Hydrive spreaders. Get the best—get Mobility Hydrive.
Contact GVM for a complete offering of the products we distribute or log on to our new parts website at the link below.

HOME | UPCOMING SHOWS | DISTRIBUTORS | CONTACT INFORMATION | GVM PARTS | GVM SNOW | ALLIANCE APPLICATION EQUIPMEN T | AGJUNCTION | CREDIT APPLICATION